User Mode/strobe
This mode allows the user to set the intensity of R, G, B separately to get endless colour mixing from the control
board without a DMX controller
1) Press <MODE> until "U -" is displayed then press "Enter" to confirm.
2) Use <UP> and <DOWN> to select the " r / G / b" for Colours intensity or "S" for strobe, then press the "Enter" to
confirm.
3) Use <UP> and <DOWN> to set the colours intensity values " 0 ~ 255" or Strobe speed values "0~20"
(Slow~Fast), then press "Enter" to confirm.
Master/Slave Operation
This mode allows for multiple Slave units to follow a single Master unit.
1) Set the Master unit to one of the standalone operating modes: Automatic, Sound mode, User mode or Static
Colour mode.
2) Set the Slave units to the DMX starting address “d1” (see DMX addressing section).
When using a Master/Slave setup, only one unit must be set as the Master unit. All other units must be set as a
Slave and to d1.
DMX values
9 Channels Mode:
CHANNEL
VALUE
FUNCTION
1
000-255
Master DIMMER 0% ~ 100%
2
000-255
Red 0% ~ 100% (or Step Time when playing CUS. 01-10)
3
000-255
Green 0% ~ 100% (or Fade time when playing CUS. 01-10)
4
000-255
Blue 0% ~ 100%
5
000-010
No Function
011-030
RED 100% / GREEN UP / BLUE 0%
031-050
RED DOWN / GREEN 100% / BLUE 0%
051-070
RED 0% / GREEN 100% / BLUE UP
071-090
RED 0% / GREEN DOWN / BLUE 100%
091-110
RED UP / GREEN 0% / BLUE 100%
111-130
RED 100% / GREEN 0% / BLUE DOWN
131-150
RED 100% / GREEN UP / BLUE UP
151-170
RED DOWN / GREEN DOWN / BLUE 100%
171-200
RED 100% / GREEN 100% / BLUE 100%
201-205
WHITE 1: 3200K
206-210
WHITE 2: 3400K
211-215
WHITE 3 4200K
216-220
WHITE 4: 4900K
221-225
WHITE 5: 5600K
226-230
WHITE 6: 5900K
231-235
WHITE 7: 6500 K
236-240
WHITE 8: 7200K
241-245
WHITE 9: 8000K
246-250
WHITE10: 8500K
251-255
WHITE11: 10000K
6
000-009
Strobe OFF
010-255
Strobe 0 ~ 20Hz ( Slow ~ Fast)
7
000-023
No Function
