Standalone pre-programmed laser show
Press FUNC to enter the mode option. Keep pressing until the LED panel shows one of the following:
ArA, ASr, AFd, ASd, SrA, SSr, SFd, SSd.
Press UP or DOWN to select your favourite Standalone mode as above. Press ENTER to confirm the
setting. The laser is working in stand alone. Each time when you turn on your laser, it will default to this
setting.
In standalone mode, press the function button to choose a different program and the display will flash. Use
the up and down buttons to select the desired mode then press enter to confirm.
DISPLAY
STAND ALONE MODE LASER EFFECT
ArA
Mixed laser effect show automatic mode with manual control of led wash effect
Use led colour choice section to change led colour
ASr
A
uto mixed
S
low laser effect with
r
andom order with manual control of led wash effect
Use led colour choice section to change led colour
AFd
A
uto
F
ast
d
ot laser effect with manual control of led wash effect
Use led colour choice section to change led colour
ASd
A
uto
S
low
d
ots laser effect with manual control of led wash effect
Use led colour choice section to change led colour
SrA
S
ound activated
rA
ndom mixed laser effect with manual control of led wash effect
Use led colour choice section to change led colour
SSr
S
ound activated
S
low
r
andom mixed laser effect with manual control of led wash effect
Use led colour choice section to change led colour
SFd
S
ound activated
F
ast moving
d
ots laser effect with manual control of led wash effect
Use led colour choice section to change led colour
SSd
S
ound active
S
low moving
d
ots laser effect with manual control of led wash effect
Use led colour choice section to change led colour
LED colour choice
Press FUNC to enter mode option.
Keep pressing until the LED panel shows either one of LEd
，
Loo
，
rAn
，
-r-
，
-Y-
，
-G-, -C-, -b-, -P- & -W-.
colours explained in grid below.
Press UP or DOWN to select your favourite LED colour as above. Press ENTER to confirm the setting.
The LED will be in the colour which you selected. Each time you turn on your laser, it will default to this
colour option.
In the COLOUR CHOICE setting, the LED COLOUR that you are going to choose will flash. Press UP or
DOWN to change the LED colour, you will have 10 different LED colour modes. Their display and effects
are listed below:
DISPLAY
LED COLOUR
DISPLAY
LED COLOUR
LEd
LED Colour
-G-
Green
Loo
Colour Looping
-C-
Cyan
rAn
Colour Random
-b-
Blue
-r-
Red
-P-
Purple
-Y-
Yellow
White
Master/slave mode
Press FUNC to enter mode option. Keep pressing until the LED panel shows SLA. Press ENTER to
confirm the setting.
The laser is working in slave mode. Connect master laser and slave lasers with DMX cable, the SLAVE
lasers will do exactly what the master laser does.
DMX mode
Press FUNC to enter MODE OPTION
Until the LED panel shows 001.
Press ENTER to confirm the setting.
The laser is working in “DMX MODE”. With help of UP/DOWN button, change the number to the desired
DMX start address.
