PATTERN MIRROR REVERSE SETTING
FIG. A
Press FUNC to enter the MODE selection
Use the up/down buttons to set the LED display to
match Fig A.
Press ENTER to confirm the setting.
FIG. B
Using the up/down buttons, set the LED display to match
Fig. B. This will rotate the graphic in the X direction.
FIG. C
Using the up/down buttons, set the LED display to match
Fig. C. This will flip the graphic in the Y direction.
ILDA Control Mode
This unit has the ILDA DB25 port which allows control of the laser via a PC/Mac laser or lighting software. The PC must be
connected to an interface and then the ILDA cable from the interface is connected to the ILDA input socket on the rear of the laser.
When connecting the ILDA plug to the laser this will override all built in standalone functions of the laser, and can then only be
controlled by the PC/Mac software. Removing the ILDA cable will re-enable all standalone functions.
Please note: it should be possible for any ILDA controlled software to operate this laser, if your software is having problems
controlling the laser this maybe down to a cable connection issue. Some interfaces and cables may have different wiring
configuration. The fourth and seventeenth pin of the ILDA socket need to be connected. If you rectify this issue on your interface
then this will cure the control issue.
DMX Channels Chart
Several operating modes were pre-programmed into this laser projector on DMX channel 1. To enable full DMX control, channel 1
must be set to DMX control mode and have a value of 250-255 this will enable the rest of the DMX channels.
DMX channels chart when ILDA is connected
Channel
Value
Function
CH 1 – Grating rotation
000-004 No grating rotating
005-127 Clockwise grating rotating
128-133 No grating rotating
134-255 Anticlockwise grating rotating
CH2 – Grating effect
000-031 Laser 3D Effect
032-063 Scanned Beam Effect (Pattern Effect)
064-095 Laser Lumina Effect
096-127 Scanned Beam Effect (Pattern Effect)
128-159 Burst Grating Effect
160-191 Scanned Beam Effect (Pattern Effect)
192-223 Laser Universal Effect
224-255 Scanned Beam Effect (Pattern Effect)
