16. SD PORT
Insert a SD card.
17. USB PORT
Insert a USB memory stick or external hard disk drive (up to 100Gb).
18. BASS EQ
This adjusts the bass frequency level of the output signal (left hand set of controls for channel 1 / right hand side
controls for channel 2).
19. MIDDLE EQ
This adjusts the mid frequency level of the output signal (left hand set of controls for channel 1 / right hand side
controls for channel 2).
20. TREBLE EQ
This adjusts the high frequency level of the output signal (left hand set of controls for channel 1 / right hand side
controls for channel 2).
21. INPUT TOGGLE SWITCH
Selects which source will be live to the channel based on what you have connected to the rear panel input section.
In left position SD/USB are active. In right position LINE/PHONO are active.
22. GAIN CONTROL
The left gain control adjusts the gain level of channel 1,the right gain control adjusts the gain level of channel 2.
23. MASTER LEVEL
Adjusts the main master level output.
24. SD/USB BUTTON
Press once: to read from the SD card.
Press again: to read from the USB source.
25. FOLDER/TRACK
Press the Folder/Track button.
When the button is illuminated the unit is in FOLDER mode.
By using the << or >> buttons, you can choose the folder you wish to access on your memory device.
Press the Folder/Track button again and when the light goes out the unit is in TRACK mode.
Press the <<or >> buttons to skip through and select tracks.
26. >>
In FOLDER mode >> searches forward through the saved folders on your memory device.
In TRACK mode, >> searches forward through the saved tracks on your memory device.
Hold down the button to double the speed of the search.
27. <<
In FOLDER mode << searches backwards through the saved folders on your memory device.
In TRACK mode, << searches backwards through the saved tracks on your memory device.
Hold down the button to double the speed of the search.
28. SINGLE / CONTINUE BUTTON
Press to switch between Single and Countinuous play modes. The mode is indicated on the display (15).
29. IN BUTTON (LOOP SYSTEM)
This button sets the beginning of the loop. The Loop indicator on the display flashes.
5
