DMX channel control
Channel
Function
Value
Description
CH1
Brightness
000-255
UV brightness 0-100%
CH2
Strobe
000-255
Adjusts the strobe speed from slow to fast
CH3
No function
000-029
No function
CH3
Bank brightness
030-255
Adjusts the brightness of each bank (for static use)
CH4
No function
000-084
No function
CH4
Fade/pulse effect
085-169
The speed can be adjusted by CH5*
CH4
Chase effect
170-255
The speed can be adjusted by CH5*
CH5
Speed adjustment for CH4
000-255
Speed adjust when CH4 is set to 085-169 or 170-255
* For best use of channel 5 speed control, use address 240-255.
Master
/
Slave mode operation
Setting the
Master
unit
Press the MENU button to select the desired mode, Auto or Sound-to-Light. Press enter to confirm.
Setting the
Slave
units
Ensure that no DMX controller is connected then connect other units to each other in a chain using DMX cables (from DMX OUT on
the Master unit to DMX IN on the first Slave, then DMX OUT on the first Slave to DMX IN on the second Slave (and so on).
Ensure that all Slave units are set to
Sub.
on the rear display. All connected Slave units will follow the controls from the Master unit.
Troubleshooting
Problem
Check list
Troubleshooting
No output -
the unit does not
appear to work
1. Check if the power cord is connected to the input
mains socket of the unit.
2. Check if the ambient temperature in a safe range.
1. Make sure there is mains present to the cable,
check the fuse or replace the cable.
2. Ensure the ambient temperature is suitable.
LEDs are dimmed
1. Check if the power cord is connected to the input
mains socket of the unit.
1. Make sure the mains input voltage is the
correct voltage.
No DMX input
1. Check that the cable is not damaged.
2. Check the polarity of the pin connections is correct.
3. Check lf the unit is in DMX mode.
4. Check if 2 units are set as Master units in a chain.
1. Change the DMX cable.
2. Correct the DMX polarity or change the cable.
3. Set up the function mode as DMX.
4. Set all other units as Slave units in the chain.
Technical specifications
DMX512 control channels:
5
DMX512 input & output connection:
3 pin XLR
Mode:
DMX512 / Auto / Sound-to-Light / Master/Slave
Power consumption:
50w
LEDs:
16 x 3w ultraviolet
Power supply:
IEC mains / AC 100-240V 50/60Hz
Dimensions (WxDxH):
320 x 180 x 75mm
(not including brackets)
Fuse:
250V 1.0A
Weight:
2.2Kg
Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc. E&OE.
