DIP SWITCH SETTINGS
To control the laser with a DMX controller, set dip switch No.1 and No.10 to the ON position.
If linking several DMX Laser80 FScans, the same control is required on all units (all creating the same patterns).
Set the Master unit’s dip switches No.1 and No.10 to ON and then set all slave unit’s dip switches No.2 to ON.
If you wish to link several DMX Laser80 FScans and control them individually with a DMX controller, each head will
need to be set up using DMX binary code, each unit occupies 11 DMX channels.
To use a Kam DMX Laser80 FScan with the optional mini-controller, set dip switches No.1 and No.10 to the ON
position. When the mini-controller is used, standard DMX control is not available. When linking several units
together using a mini-controller set master dip switch No.1 and No.10 to the ON position and then set all slave
unit’s dip switches to No.2.
When using the Kam DMX Laser80 FScan with no controller in stand alone mode, set dip switch No.1 to the ON
position for Automatic mode and set dip switch No.10 to ON for sound activated mode.
Technical Specifications
Operation Voltage:
AC 85V~240V/50Hz
Working power:
15W
Laser wavelength:
532nm
Laser power:
532nm/80mW
Laser class:
Class 3b
Fuse:
3A F (always replace fuse with correct value)
Channels:
11
Control signal:
DMX512
Control mode:
Mini-controller / Sound-to-Light / Automatic / DMX / Linkable
Net weight:
2.40Kg
Dimensions:
195 x 205 x 120mm
The laser is designed for indoor use only, do not use outdoors. The operating temperature is 10°~60°C.
4
For the latest product updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by:
Lamba plc
, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (
+44
) (
0
)
1582 690600
• Fax: (
+44
) (
0
)
1582 690400
• Email:
• Web:
www.lambaplc.com
©
C
O
P
Y
R
I
G
H
T
L
A
M
B
A
p
l
c
2
0
0
8
.
E
&
O
E
.
