then press ENTER to confirm.
Setting the DMX Start Address:
Mode
Value
D
001- 512
Controlling:
After having addressed the unit you may now start operating it via your lighting controller
Choosing a DMX Channel Mode with 3 or 7 Channal occupation
The device has 2 DMX-modes. The Control Board allows you to assign the DMX-Mode.
Setting DMX Mode
After setting the desired address via the UP or DOWN buttons, press the MODE button again and the display shows
7ch. In case you would rather select the 3-channel mode, press the DOWN button in order to choose the 3ch setting.
DMX-protocol
7 Channel Mode:
CHANNEL
VALUE
FUNCTION
1
000- 255
Red ( 0 -100% )
2
000- 255
Green ( 0 -100% )
3
000- 255
Blue ( 0 -100% )
4
000- 015
No Function
016- 255
Color Macro
5
000- 015
No Function
016- 255
Strobe (CH.6 @000
– 031,RGB mode only)
Slow ~ Fast
Speed (CH.6 @ values 32-223)
Slow ~ Fast
6
000 - 031
No Function
032 - 063
White Fading 0
– 100%
064 - 095
White Fading 100%
– 0
096 - 127
White Fading 0
– 100% – 0
128 - 159
7 Colors Fading 0
– 100%
160 - 191
3 Colors Chasing
192 - 223
7 Colors Chasing
224 - 255
Sound active
7
000- 255
Dimmer 0
– 100%
3 Channel Mode
CHANNEL
VALUE
FUNCTION
1
000- 255
Red ( 0 -100% )
2
000- 255
Green ( 0 -100% )
3
000- 255
Blue ( 0 -100% )
Master/Slave operation
The master/slave operation enables that several devices can be synchronized and controlled by one master device.
Set Master device via LC Display Mode :
“C – 1 ~ 7”, or “ P -- 1 ~ 6” , the Slave device DMX address “001”
Technical specifications
Power supply: 230 V AC, 50 Hz ~ / Power consumption: 80 W
Number of DMX channels: 7 / DMX-512 connection: 3-pin XLR
Sound-control: via built-in microphone
Maximum ambient temperature
T
a: 45° C / Maximum housing temperature
T
B: 60° C
Min. distance from flammable surfaces: 0.5 m / Min. distance to lighted object: 0.1 m
Number of TCL 3W LEDs: 18 / Beam angle: 22°
Fuse: F 2 A, 250V
Dimensions (LxWxH): 410 x 290 x 390 mm / Weight: 3 kg
For the latest manual updates and information on the entire Kam range please visit:
www.kam.co.uk
Kam
products are manufactured by:
Lamba plc
, Unit 1, Southfields Road, Dunstable, Bedfordshire, UK LU6 3EJ
Telephone: (+44) (
0
)
1582 690600
• Fax: (+44) (
0
)
1582 690400
Email: [email protected]
• Web: www.lambaplc.com
Due to continuous product development, specifications and appearance are subject to change.
