How to Care and Maintain
11
Phillips-head
Screwdriver
1
2
Do not use detergent or soap!
Do not disassemble
the Photocatalytic filter!
*
If drying under the sun is not possible, dry in a well-lit area thoroughly
until there is no moisture. If moisture remains on the surface,
the photocatalytic effect may not be fully demonstrated.
3
When removing the
photocatalytic filter from the
water, it may still be hot.
Be careful not to get burned
when using hot water.
Do not scrub the filter with
a brush.
<CAUTION>
Dry the filter under the sun
completely until all water
evaporates.
2in / 5cm or more
Loosen the screw on the back of
the body with a Phillips-head
screwdriver to open the cover and
remove the photocatalyst filter.
The screw is unremovable
from the cover.
Photocatalytic filter
(Once per 2-3 months*)
Soak in hot water
at 176
℉
to 212
℉ /
80
℃
to 100
℃
over 15 minutes.
