Installation
Flex Line
1. This Gas Fire Pit must be installed on flat,
stable surface, away from any combustible
materials or construction.
2. Remove the fire pit and cylinder from the
carton. Place them on any level, non-
combustible surface.
3. Place the pumice beads on the burner and
around the burner evenly.
(see Fig 1)
Fig 1
4. Unscrew the button cap of igniter, insert
AAA battery into igniter compartment with
anode outward, then screw the button cap
back in place
(see Fig 2)
Fig 2
5. Open the door and take down the lid of
cylinder cargo carefully and put it in the
center of the tank bracket.
(See fig 6-7)
6. Locate the hose out of the pathways
where people may trip over it or in areas
where the hose may be subjected to
accidental damage.
CAUTION:
Do not kink the flexible gas hose. If
it is kinked, a gas leak could occur.
