background image

Headline

Maintenance and Care Instructions

•  Unplug the unit and let it cool completely. 

•  When disconnected from the electrical supply, clean the outside of the patio heater with a 

damp cloth. Never use corrosive or solvent cleaners or immerse in water.

•  Any maintenance or repairs including replacing the halogen tube should only be carried out by 

a qualified electrician or by a qualified service centre.

Storage 

•  If the heater will not be used for a long period of time, store it in a cool, dry location when not 

in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.

Warranty For Home Use

This product is covered by a 12 month 

warranty against manufacturing faults. 

This warranty applies to domestic use 

only. It does not cover commercial use, 

mis-use or accidental damage.

To validate your warranty, register  

at www.kettler.co.uk and quote  

the product code from the front of 

 this booklet.

12 Mth

Warranty

www.kettler.co.uk

The symbol indicates that the 

product should not be discarded as 

unsorted waste but must be sent 

to separate collection facilities for 

recovery and recycling.

Summary of Contents for KLEH150-0500













Reviews: