KALOS KLEH143-0400 Assembly Instructions Manual Download Page 5

For Your Safety 

20.  The unit must be securely grounded 

during operation.

21.  If the unit gets damaged, it must be 

repaired by professional electricians with 
relevant qualifications.

22.  When the power supply cord is 

damaged, it must be replaced by a 
qualified engineer to avoid danger.

23.  The unit must not be positioned under a 

socket.

24.  When assembling, keep clear from any 

board or flammable material.

25.  The unit must be supervised by adults if 

it’s used by a child.

26.  It is not safe to install the unit by a 

swimming pool, in a bathroom or shower 
area.

27.  The unit is for household use only. It 

is not safe to use on a building site, 
greenhouse, barn or stable where there’s 
flammable dust.

28.  The head of the unit is at high 

temperature during operation. Unplug 
the unit and wait till it cools before 
cleaning.

29. 

DON’T

 use this unit in place where 

causticity or volatile air exists, i.e. dust, 
steam, gas, etc.

30. 

DON’T 

use this unit as a cloth drier or 

towel drier.

31. 

DON’T

 use this unit as a sauna heater.

32. 

DON’T

 use this unit as a room heater.

33. 

DON’T

 use this unit in place of animal 

propagating and raising.

34. 

DON’T 

immerse this unit into water for 

cleaning.

35.  The unit should be plugged in a socket, 

which is easily visible and reachable.

36.  Two Dark points may exist on the surface 

of the heating elements during the 
first few minutes after it is turned on. 
This is normal, and will not affect the 
performance of the unit.

37.  A tilt switch is fitted inside the unit for 

safety purpose.

Summary of Contents for KLEH143-0400













Reviews: