10
www.KALORIK.com
WFVC 43331 - 170120
CLEANING AND MAINTENANCE
Step 1:
To empty the dirty water from your vacuum cleaner, release the
latches and remove the main body and filtration assembly (Fig. 14).
Note: Make sure to remove the hose before releasing the latches.
Step 2:
Pour the dirty water in a bucket or in the toilet (Fig. 15). Then,
rinse under clear water.
Step 3:
Remove the sponges from the filtration assembly and rinse them
under clean water (Fig. 16).
To clean the cyclone generator:
Remove the cyclone generator from
the filtration assembly and rinse under clear water (Fig. 17).
To clean the filter:
Remove the filter from the main body and rinse under
clear water. Let the filter air dry before putting back into place (Fig. 18).
