Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
Print only
what is inside the frame,
6
USK DRM 39135 - 120501
Assembly page 6/24
Fax +1 305 430 9692
NOTE:
As a safety feature, the Mixing Spindle will not turn if the
Mixing Cup is not properly hooked under the Safety Switch.
3.
Ensure the ON/OFF Switch (7) is in the " " (OFF) position. Plug the
Power Cord into a standard electrical outlet.
4.
Press the ON/OFF Switch to the "I" position to activate the Mixing
Spindle. For pulse mixing, press the ON/OFF Switch in the "II"
position repeatedly.
5.
When mixing is finished, press the ON/OFF Switch to the " "
position and unplug the Milkshake Maker from the electrical
outlet. Carefully remove the Mixing Cup and pour the contents
into a serving glass (not included).
WARNING:
Always unplug the product from the electrical outlet
when it is not in use.
Tips:
•
Assemble all ingredients near the mixer.
•
Do not over-mix. Only mix ingredients as recommended in your
recipe.
HOW TO CLEAN
•
Always unplug from outlet before cleaning.
•
You can wipe clean the motor block with a soft damp cloth. Do
not use any abrasive cleaners or cloths, such as scouring pads.
•
For a quick rinsing of the mixing cup (for example between two
preparations), you can use clear water and switch on your
appliance for a few seconds. In this case, do not use any
detergent
•
For a full cleaning, perform a spindle cleaning procedure
described in the "Before First Use" section.
•
Wash the Stainless Steel Mixing Cup (6) in warm, soapy water or in
a dishwasher.
WARNING:
Do not immerse the appliance in water or other liquid.