TKG AP 2000 S
8
DEVICE INSTALLATION
•
It is recommended to install the unit indoors on a flat, dry floor.
•
Do not place your air purifier near a heat source, in direct sunlight, in a very humid
room or facing the air outlet of an air conditioner: this may cause deformation,
deterioration, discoloration and malfunction.
•
Avoid installing it close to TV sets, radios and other devices using waves: the image
could be blurred, noise could occur and there could be interference with the remote
control. Keep a distance of at least 1m.
•
In order to optimize the air circulation in the room, please leave a space of min. 20cm
on each side of the unit and min. 30cm above it.
•
Do not use the air purifier in environments with insecticides or room fragrances.
Chemical residues may accumulate in the unit and be released later, causing health
damage.
•
Do not place anything on the unit, especially not magnets or metal objects.
OPERATION
The air purifier improves air quality thanks to several types of filters, ionization and a
bactericidal UV lamp.
This is the AOS technology - 7-step purification:
Aluminium pre-filter
: filters out coarse dust particles, dandruff, pollen, flying particles and
other pollutants. It is washable and reusable.
Cold catalyst filter
: the catalyst is used to treat formaldehyde, ammonia, benzene, VOCs,
hydrogen sulfide and other harmful gases released from plywood, furniture, wallpaper,
carpets, curtains and bedspreads.
Formaldehyde Removal Filter
: this filter is designed to quickly absorb and break down
formaldehyde.
Antibacterial Filter
: the 5-micron filter with its antimicrobial agents effectively eliminates
bacteria in the air.
HEPA Filter
: the precision of the HEPA filter is 0.01 microns and it removes particles larger
than 0.01 microns at a filtration rate of 99% or more. Dust, bacteria, fungi, viruses, allergens
and other small particles do not pass through the HEPA filter.
Sterilizing UV light
: a variety of bacteria can be killed by UV light 365nm. The germicidal UV
lamp purifies the air and eliminates smoke and mould odours.
Release of anions
: The ionizer releases a large amount of anions and negatively charges
oxygen, collecting positively charged particles such as floating dust, bacteria, viruses and
smoke. The particles become denser and fall to the ground; the smaller the particles, the
higher the capture rate.
