6
www.KALORIK.com
HVC 46818 - 200605
2.
Plug the charging dock into a wall outlet. Allow the handheld vacuum
to charge until all three indicator lights are lit up.
USING YOUR VACUUM CLEANER
1.
If using an attachment, install per the instructions in the ACCESSORIES
section.
2.
Press the power button. Press the speed button below the power
button if you wish to change the speed.
Note
: The LED indicators show how much battery power is left in the
handheld vacuum. When the battery power is low, only one indictor will
be on and will begin to blink.
3.
Run the nozzle over the surface to be cleaned.
4.
When done vacuuming, press the power button again to turn off.
5.
To empty the dust container, place the vacuum over a trash can
and press the release button as shown below.
Speed button
Power button
Release button
LED indicators
