background image

Dear Client,

We thank you for having chosen one of our products, the fruit of technological experience and of continual research for a 
superior quality product in terms of safety, dependability, and service.
In this manual you will find all the information and useful suggestions to use your product with the maximum safety and 
efficiency.

GB

Please remember that the first lighting of the stove must be 
handled by our Authorized Assistance Centre (Law 37/2008) 
who will check the installation and complete the guarantee.

!

฀ ฀

release  the  manufacturer 

from every eventual damage

 derived from the use of the stove.

cannot be used as an incinerator. Do not use fuels other than pellets.

฀ ฀ ฀

an integral part of the product

 and must remain 

with it during its entire lifetime. If the product is sold or transferred, 

be sure that the booklet is present since the 

information contained in it are addressed to the buyer

, and to all those persons of various titles who complete 

the installation, use and maintenance.

Carefully read the instructions and the technical information

 contained in this manual, before proceeding with 

the installation, use, and any operation on the product.

฀ ฀

฀ ฀

guarantees the safety of people and the pro-

duct, the economy of use and a longer functioning lifetime.

฀ ฀

฀ ฀

฀ ฀

฀ ฀

฀ ฀ ฀

product, in any case, before effecting any operation on the stove, it is recommended to keep said manual available and 

pay scrupulous attention to the instructions written therein.

Be very careful when moving the ceramic details 

where present.

฀ ฀

฀ ฀

The wall where the product will be placed must not be constructed in wood,

 or in any case, made of an 

฀ ฀

฀ ฀ ฀

฀ ฀

฀ ฀

฀ ฀ ฀

parts of the stove (door, handle, sides) can reach high temperatures.

 

฀ ฀

฀ ฀ ฀ ฀

฀ ฀

฀ ฀

and animals.

฀ ฀

฀ ฀

฀ ฀

฀ ฀

฀ ฀

฀ ฀

policy of constant development and renewal of the product 

can, without any notice, make any modifications 

that are believed opportune.

฀฀

฀ ฀

฀ ฀ ฀

฀ ฀ ฀

฀ ฀

wear gloves while handling

 with the 

door for pellets loading and the door handle. 

Installation is not recommended in a bedroom.

Never cover the body of the stove in any way or obstruct the 
openings placed on the upper side when the device is opera-
ting. All our stoves are trial lighted on the construction line.

In the event of a fire, disconnect the power supply, use an extinguisher and call the fire fighters if neces-
sary. After that contact the Authorised Assistance Centre.

!

3

Summary of Contents for Angela 10

























Reviews: