Kalmar Ottawa t2, Maintenance Manual

Page: 25 / 262

16 0.4 Preventive Maintenance Technique – C. Preventive Maintenance
Maintenance Manual Ottawa T2 4x2
Check Trailer Light Cord (if applicable) — Inspect light
cord for cuts and abrasions. As the lights of the truck are
checked confirm that a trailer connected with the light cord
also has lights. This can be done either with a trailer con-
nected or with a "test box".
Check Headlights/Marker Lights — Start engine, turn on
light switches and confirm lights are illuminated.
Check Turn Signals — With key on, activate the turn sig-
nal switch and the flasher to confirm that the turn signals
are working.
Check Strobe Light (if applicable) — With the key on, turn
on the strobe light to confirm its operation.
Check Spotlights — With the key on, turn on the spot-
light(s) to confirm its operation.
Check Wiper Blades — Inspect wiper blades for tears or
excessive wear.
Check Windshield Washer Fluid Level — Raise the hood
and fill washer bottle as necessary.
Check Transmission Fluid Level — With the engine run-
ning, use the transmission dipstick to check the fluid level
per the guidelines in the Transmission Operator's Manual.
0.4.4 Cab Up
page –
Maintenance
Check Operation of Cab Tilt Pump — Pull safety prop re-
lease cable and activate cab tilt switch. The cab should
rise.
Check Cab Safety Prop — Inspect the cab safety prop
that encloses the cab lift cylinder. It should drop freely into
place to support the cab when it is in the raised position.
The lower cab cylinder pin and bracket should be inspected
for signs of fatigue.
Check Cab Suspension and Latch — Inspect the linkag-
es of the suspension system for excessive wear and proper
alignment. Inspect the air bag for leaks or signs of abrasion.
Inspect the lock jaw for excessive wear and proper opera-
tion.
Check Engine Intake Ducting for Leaks — Inspect all en-
gine clean air tubes and hoses for leaks. All clamps should
be checked for proper torque and all joints should be prop-
erly aligned.
Check Radiator for Leaks — Inspect radiator core and
tanks for signs of coolant leaks.
Check Radiator Mounts — Inspect radiator mounts for
wear or excessive looseness.