1. Preparation
Install the water supplies and drain piping. Install the supply
stops so the handles will not touch the pedestal when fully open.
Install sufficient backing behind the finished wall to provide
secure material for the anchoring devices.
Place the pedestal in the approximate location.
NOTE:
The sink
must
be supported by the pedestal.
Carefully lift the sink into place on the pedestal, and slowly move
the pedestal as required to ensure proper fit.
NOTE:
Self-adhesive gaskets are not supplied with all pedestal
sinks.
To level the sink, apply self-adhesive gaskets as needed where the
pedestal contacts the sink.
Locate the two sink anchoring holes, and mark the hole locations
on the finished wall.
Carefully remove the sink from the pedestal and set aside. Move
the pedestal from the area.
Backing
Mark the anchor
hole locations.
Self-Adhesive
Gasket
1008428-2-C
4
Kallista
