INSTALLATION INSTRUCTIONS
Wall Supply Elbow, Fixed Wall Bracket,
Handshower & Hose
1121253_2_A
3 of 5
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALL The PIPe NIPPLe
1.
Finished Wall
5/16”
(0.8 cm)
1/2” Pipe Nipple
Apply sealant tape.
Install a 1/2″ NPT pipe nipple so that it extends 5/16” beyond the finished wall when fully tightened.
Run water through the system to flush out dirt and debris.
Apply sealant tape around the exposed threads of the pipe nipple.
INSTALL The SUPPLY eLBOw
2.
Finished Wall
1/2” Pipe Nipple
Escutcheon
Supply Elbow
Install Gasket
Hub
Install the gasket into the back of the escutcheon.
Slide the escutcheon onto the supply elbow, starting at the hub and stopping at the 90
°
bend.
Thread the supply elbow onto the 1/2” pipe nipple.
Tighten the wall elbow using a clean strap wrench.
Press the escutcheon against the finished wall.
If desired, apply a bead of clear sealant around the perimeter of the escutcheon.
