Kallista P22134, Installation Manual

Page: 5 / 28

3. Install the Handshower
Remove the locking nut, washers, and sleeve from the holder.
Slide the holder through the mounting hole from above the
mounting surface.
Insert the hose end with O-ring through the top of the sleeve.
From underneath the mounting surface, reinstall the sleeve,
washers, locking nut, and nut to the holder.
Wrench tighten the locking nut.
Ensure the gasket is in place at the end of the handshower.
Thread the hose end with O-ring and gasket to the handshower.
Seat the handshower into the holder.
Holder
Sleeve
Gasket
Gasket
Handshower
Washers
Locking Nut
Hose End with Nut
Attach to faucet or valve.
Hose
Nut
Mounting
Surface
Hose End
with O-Ring
Kallista 5 1008412-2-C