2. Install the Handshower
Insert the washer into the nut of the bracket assembly.
Wrench tighten the nut of the bracket assembly to the hose outlet
on the bath faucet.
Secure the female hose end to the hose outlet on the bracket
assembly.
Secure the male hose end to the handshower.
Place the handshower on the cradle.
3. Installation Checkout
Ensure that all connections are watertight.
Open the drain.
Open the main water supply and check for leaks. Repair as
necessary.
Open both hot and cold valves and run water through the spout
for one minute to remove debris.
Activate the handshower. Check for leaks at the flexible hose and
handshower hose connections.
Close the valves.
Nut
Washer
Bracket
Assembly
Hose Outlet on
Bath Faucet
Hose
Outlet
Cradle
Male
Hose End
Female
Hose End
1019831-2-C
6
Kallista
