INSTALLATION INSTRUCTIONS
Basin Drain
1506294-2-
A
2 of 5
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
THANK YOU FOR CHOOSING KALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BEFORE YOU BEGIN
The appearance of your product may differ from the illustrations shown in these instructions, however, the
installation procedure is the same.
Shut off the main water supply.
Observe all local plumbing codes.
Carefully inspect waste and supply tubing for any sign of damage. Replace if necessary.
For new installations, install the faucet before installing the lavatory.
TOOLS AND MATERIALS
1. DRAIN INSTALLATION
Disassemble the stopper (if applicable) and the flange from the drain body.
Apply a small bead of putty or sealant to the bottom of the flange. Insert
the flange into the drain opening. Ensure the gasket is inside the flange.
For grid drains only:
From the underside of the lavatory thread the drain body onto the flange
assembly. Tighten firmly.
For stopper drains only:
From the underside of the lavatory thread the drain body onto the flange
assembly. Tighten firmly.
Install the stopper and tighten firmly.
Turn the drain body so that the word KALLISTA on the stopper is
straight.
For all models:
Tighten the drain body nut firmly while holding the drain body to
maintain the stopper position.
Using a damp cloth, remove any excess putty or sealant.
Ensure that the tailpiece is tightly threaded and connect the trap.
