Before You Begin (cont.)
The appearance of your product may differ from what is shown
in these instructions, however, the installation procedure is the
same.
Use proper fasteners and techniques to ensure that the frame will
support a minimum of 300 lbs (136 kg). Locate the fasteners for
easy access in the event the sink needs to be removed.
Plan the sink installation so future removal from underneath the
countertop is possible without damaging the countertop.
Do not
use adhesive sealants.
For L20513-00-PDS Only:
This sink is intended for installation
into a standard 24
″
(610 mm) base cabinet.
For L20515-00-PDS Only:
This sink is intended for installation
into a standard 30
″
(762 mm) base cabinet.
For L20857-00-PDS Only:
This sink is intended for installation
into a standard 36
″
(914 mm) base cabinet.
To ensure proper fit of the sink in the cabinet, we suggest you
provide the cabinetmaker with the actual sink that will be
installed.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protective carton until you are
ready to install it.
Inspect the drain and supply tubing. Replace if necessary.
If possible, assemble the faucet and strainer to the sink before
installing the sink.
Anchors and fasteners to be provided and installed by the
countertop manufacturer.
All information in these instructions is based on the latest product
information available at the time of publication. KALLISTA
reserves the right to make revisions in the design of products
without notice, as specified in the Price Book.
Kallista
3
1369514-2-A
