background image

 

 

 

- 9 -

original routing and fixing configuration when servicing is completed. All the wires 

are routed far away from the areas that become hot (such as the heat sink). These wires 

are fixed in position with the wire clamps so that the wires do not move, thereby 

ensuring that they are not damaged and their materials do not deteriorate over long 

periods of time. Therefore, route the cables and fix the cables to the original position 

and states using the wire clamps. 

• Perform a safety check when servicing is completed. Verify that the peripherals of 

the serviced points have not undergone any deterioration during servicing. Also verify 

that the screws, parts and cables removed for servicing purposes have all been 

returned to their proper locations in accordance with the original setup. 

 

 

    The lightning flash with arrowhead symbol, within an equilateral 

triangle is intended to alert the user to the presence of uninsulated 

dangerous voltage within the products enclosure that may be of sufficient magnitude 

to constitute a risk of electric shock. 

The exclamation point within an equilateral triangle is intended to 

alert the user to the presence of important operating and maintenance 

(servicing) instructions in the literature accompanying the set. 

 

 

 

 

Summary of Contents for LTDN40K221TWAM


















































Reviews: