background image

8  

  

V User Manual Impulse Pedelec

2   Legal  principles 

The essential idea behind the Pedelec is not only to be 
able to cover greater distances more quickly, but also 
more comfortably. You can choose to relax and let the bike 
do the work, exert yourself more physically, or simply get 
from A to B as fast as possible. You can decide this your-
self by choosing an appropriate assist level. 

This gives you more confidence on the road, as the power-
ful acceleration gives you more control and a greater de-
gree of security. Your Pedelec assists you with an output 
that adapts to your pedalling force up to roughly 25 km/h.

In some EU countries, the Pedelec, like all other bikes, 
must comply with certain regulations, the Road Traffic 
Licensing Regulations (StVZO) in Germany for example. 
Please observe the relevant explanations and general 
information provided in the General User Manual.

These statutory requirements apply for a Pedelec:

 

The motor is designed only to provide pedalling as-
sistance, i.e. it can only "assist" the rider when he/
she turns the pedals. 

 

The average motor output must not exceed 250 W. 

 

As the speed increases, the rate at which the motor 
output reduces must also increase more intensely. 

 

The motor must switch off once the bike reaches a 
speed of 25 km/h. 

2.1   Meaning for the rider 

 

You do not legally have to wear a helmet. In the 
interest of your own safety, however, you should 

never

 ride without a helmet.

 

You do not legally have to have a driving license 
(unless you own a model with pushing assistance, 

 Chapter 2.2 "Pushing assistance"

).

 

You do not legally have to have insurance.

 

No age restriction applies for a Pedelec.

 

The regulations governing the use of cycle paths 
are the same as for normal bikes.

These regulations apply to you wherever you are in the 
European Union. It is possible that different regulations 
exist in other countries, also inside the EU in individual 
cases. Before using your Pedelec abroad, find out about 
the legal situation in the relevant country.

2.2   Pushing  assistance 

Your Pedelec is available in a version with or without 
pushing assistance. Your specialist cycle shop can retrofit 
a control panel with pushing assistance if required. 

Button for pushing assistance 

 

The pushing assistance moves the Pedelec slowly (at a maxi-
mum speed of 6 km/h) without you having to turn the ped-
als, e.g. if you are manoeuvring in a tight space or are push-
ing your Pedelec out of a basement garage. 
In Germany, if you were born after 01. 04. 1965, you will 
need a moped test certificate for the version with pushing 
assistance. If you already have another type of driving li-
cence, this automatically includes the moped test certificate.

The pushing assistance is not suitable for use as starting 
assistance.

3   Special features of Pedelec with 

Impulse drive

Your Pedelec has special features that are designed to en-
hance your safety and comfort, some of which are unique 
worldwide.

 

The Impulse drive has been developed exclusively 
to allow a centre motor to be installed without 
having to dispense with the safety and convenience 
of a back-pedal function. 
 
This means you can rely on three brakes; the famil-
iar back-pedal brake and the powerful, modern rim 
brakes. 
 

1

3

2

1  Rim brake, front 

2  Back-pedal brake

3  Rim brake, rear

Summary of Contents for Derby Cycle Werke GmbH 2011

































































































































































































































































































































































































Reviews: