KALI AUDIO SM-5-C User Manual Download Page 3

Kali Audio SM-5-C Users’ Guide

3

Important Safety Information

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
8. Keep ventilation opening free of dust or other matter.
9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat.
10. No naked flame sources (such as lighted candles,) should be placed on the product.
11. Use only attachments and/or accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, plate, bracket, or table specified by the manufacturer. When a 

cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Refer all servicing to qualified service personnel. Servicing is required when:

 

A. The apparatus is damaged in any way

 

B. The power supply cord or plug is damaged

 

C. Liquid or other objects have fallen into the product

 

D. The product has been exposed to rain or moisture

 

E. The product does not operate normally

 

F. The product has been dropped

14. This apparatus shall not be exposed to dripping or splashing.

15. No object filled with liquids, such as a vase or a glass, should be placed on the apparatus.

16. This apparatus is to be used in a moderate climate. Do not expose to extremely high or low tem-

peratures.

17. High sound pressure in excess of 85 dB can cause hearing damage and/or loss. Do not expose 
yourself to high sound pressure levels.

Summary of Contents for SM-5-C



















Reviews: