Charging the Battery:
Operation of the Vehicle:
1.Make sure the battery is fully charged and the motor plug is connected to
the battery plug.
2.Before using the vehicle, please connect the plugs which located under the seat.
3.Press the direction switch to “F” and press the accelerator pedal,
vehicle will move forward.
4.To stop the vehicle remove foot from accelerator pedal. When stopped, press
the direction switch to “B” then press the accelerator
pedal, vehicle will move backward.
NOTE: Do not change directions while vehicl
e
is in motion.
6
located near the seat.
then plug the charger into a household outlet.
charge more than 20 hours.
charger and store it in a cool and dry place.
Remove the two retaining screws from battery securing
bracket, then slide out the bracket to release the battery.
Carefully remove the battery from the compartment by
slide out into the foot well ensuring you don’t pull on any
of the wires.
Carefully release the two retaining spade connectors at
the terminals of the battery and remove the battery from
the foot well.
Carefully connect the battery ensuring the RED wire is
connected to th POSITIVE terminal and the BLACK wire
is connected to the NEGATIVE terminal of the battery.
Slide the battery back into position ensuring the wires
are loosely positioned above the battery.
Replace the battery securing bracket and resecure
retaining screws.
The supply terminals are not to be short-circuit.
How to remove & insert the battery: