31
© KALEAS GmbH & Co. KG
LDM 500-60
+
}
Do not leave the device unattended; switch it off after use.
!
Observe the safety instructions, guidelines, occupational safety
and accident prevention regulations as well as protection poli-
cies applicable to your job and workplace.
Electrical safety
}
Do not operate the device in a damp or wet environment.
}
Remove the battery if the device will not be used for an
extended period.
!
Utilize only batteries, power packs and system voltage intended
for use in this specific device. Otherwise, the device may pose a
fire hazard.
Device-specific safety instructions
!
Use the device and related accessories only according to the
intended use as well these instructions.
!
Before using, check the device for possible damage. Do not use
it if the safety is in doubt.
}
Ensure the device is protected when storing it and out of the
reach of children.
}
Protect the device against moisture, corrosive substances, direct
sunlight, extreme temperatures and wide temperature fluctua-
tions.
}
Avoid heavy vibrations or jolts, and never drop the device or
use force.
}
Keep the device away from electromagnetic sources such as
induction heating and electrical welding devices. Avoid static
charges since these may damage the device.
}
Avoid accidentally switching on the device. Make sure it is
switched off when inserting batteries.
}
Do not block openings on the device.
Laser-specific handling rules
!
A laser emits an extremely intensive beam of light. Improper use
can cause accidents, severe damage and permanent eye injury.
EN
