background image

ASSEMBLY AND DRESSING INSTRUCTIONS

GENERAL NOTES

v

For your safety and proper operation of fixture, read and understand all instructions completely before commencing installation.

v

This fixture is suited for dry locations. Never install fixture on damp ceiling; room should be dry and well ventilated.

v

Extreme care should be taken to avoid damage to the surface of lighting fixture and wires. Wearing gloves is recommended for installation.

v

Connect ribbed wire of lighting fixture to live wire, while smooth wire of lighting to neutral. Connect bare copper or silver color ground wire of 

fixture to the double colored or green wire of outlet box.

v

Use UL LISTED wire nuts for the wiring connections in this fixture. Wrap wire nut connections with UL LISTED electrical tape.

v

Keep lighting away from acid, alkali and other corrosive chemical or gas; clean the fixture with a clean cloth only.

v

Fixture must be firmly secured when installing ceiling tube, chain pipe and other connecting parts.

v

Never cover the lighting fixture when power is connected.

v

Disconnect the power before installing, cleaning and/or replacing light bulb.

v

Extreme care should be taken when installing and cleaning of Glass and/or Crystal Components.

v

This product is rated 110-130V/60HZ bulb 40W Maximum.

v

Save these instructions for future reference.

WARNING

T

he  electricity  must  be  turned  off  at  the  main  fuse  box  or  circuit  breaker  before  installing  this  fixture.  Turning  the  power  off  using  the  light  switch  may 

not be sufficient to prevent electrical shock.

                                                                  

                                                                *ALLEGRI will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

WARNING!

CONTENTS ARE FRAGILE

HANDLE WITH CARE

THE METAL FRAME, FINISH AND CRYSTAL COMPONENTS OF THIS CHANDELIER ARE VERY DELICATE.

PLEASE EXERCISE EXTREME CAUTION DURING UNPACKING AND INSTALLATION.

PLACE ALL PIECES TOGETHER IN A NUMERICAL ORDER AND IN THE ORIENTATION DEPICTED.

REFER TO THE PARTS LIST TO AVOID ANY CONFUSION BETWEEN PARTS THE PARTS NUMBER MUST COINCIDE.

CAUTION:

 

FAILURE 

TO 

INSTALL 

THIS 

FIXTURE 

PROPERLY 

MAY 

RESULT 

IN  SERIOUS 

PERSONAL 

INJURY  AND 

PROPERTY DAMAGE. All electrical components must be installed only by a Licensed Electrician.

This  product  must  be  installed  in  accordance  with  the  National  Electric  Code  (NEC),  and  appropriate  local  electrical  code(s),  by  a 

person familiar with the construction and operation of the product and the hazard involved.*

CAUTION: Do not exceed maximum wattage note on fixture. Uses only recommended bulbs with fixture.

WWW.ALLEGRICRYSTAL.COM

866.820.2665

P2

Summary of Contents for ALLEGRI 027753







Reviews: