Shenzhen Just Motion Control Electro-mechanics Co., Ltd
0755-26509689
- 25 -
User-defined
inductance of
motor
This parameter is set the inductance of motor. 0
means 2DM860H gets the inductance by control
algorithm of Parameter auto-setup, while 1 means
2DM860H gets the inductance through user sets.
Result of position
memory
This parameter is set to control the smoothness of
Display the result of position memory
Time of enable
position memory
This parameter is set of the time when enable the
position memory. The time is mean the space of
time to stop plus input.
11. Processing Methods to Common Problems and
Faults
11.1 Power on power light off
No power input, please check the power supply circuit. The voltage
is too low.
11.2 Power on red alarm light on
Please check the motor is connected with the drive.
The stepper digital drive is over voltage or under voltage. Please
lower or increase the input voltage.
