5
»INSTALLING THE STAINLESS STEEL HANDLE
This wine Cooler includes a stainless steel handle.To install the handle please follow the below
instructions:
▼
Pull away the door gasket in the area where the handle is to be installed on the left side as shown below in
illustration 1. The gasket is easily displaced by hand, no tools are necessary.
▼
Align the handle with the screws installed.Tighten the screws using a Phillips head screwdriver until the
handle sets both flush and secured tightly against the door frame. (DO NOT over tighten as this will casue
damage to the handle assembly).
▼
Replace the door gasket to its original position.
▼
When you use the Cooler for the first time or restart the Cooler after having been shut off for a long time,
there could be a few degrees variance between the temperature you select and the one indicated on the LED
readout. This is normal and it is due to the length of the activation time. Once the Cooler is running for a few
hours everything will be back to normal.
1 .Gasket
3.Phillips Head Screw
2.Phillips Head Screw Driver
4.Handle
