Kalamera KRC-157DZB, Instruction Manual

Page: 14 / 16

- 14 -
Operating Your Wine Cooler
The Control Panel:
KRC-18SZB & KRC-30SZB
How to use the press-buttons on the Display Panel:
 To control the temperature, press UP or DOWN button. Each press would adjust the temperature by 1°C
between 5~18°C or 1°F between 40~66°F.
 To turn on or off the internal LED lighting, press LIGHT button on the right side.
 To switch the temperature display from Celsius Degree to be Fahrenheit Degree or vice versa, press C/F button.
KRC-46DZB & KRC-157DZB
 To control the upper zone temperature, press UP or DOWN button on the left side. Each press would adjust the
temperature by 1°C between 5~10°C or 1°F between 40~50°F.

To control the lower zone temperature, press UP or DOWN button on the right side. Each press would adjust the
temperature by 1°C between 10~18°C or 1°F between 50~66°F.

To turn on or off the internal LED lighting, press LIGHT button on the right side.

To switch the temperature display from Celsius Degree to be Fahrenheit Degree or vice versa, press C/F button.
Care And Maintenance
Cleaning your wine cooler

Unplug the wine cooler and remove the bottles.

Wash the inside with warm water or baking soda solution. The solution should be about 2 tablespoons of baking
soda to a quart of water.

The outside of wine cooler should be cleaned with mild detergent or warm water.

Draw out the water box at the bottom, and wash it.
Moving your wine cooler

Remove all the bottles.

Securely tape down all loose items inside your wine cooler.

Turn the leveling legs up to the base to avoid damage.

Tape the door.

Be sure the wine cooler stays in the upright position during transportation.