Switch-on:
Insert the SteakChamp in
the Activator briefly.
SteakChamp switches on
immediately and auto-
matically. A flashing signal
(about every 6 sec.)
indicates that SteakChamp
is now active.
Insert the SteakChamp
sideways into the meat,
until it is completely inside
and only the wings
protrude from the meat.
For correct results it is
necessary to place the
SteakChamp in the center
of the cut.
Prepare your steak as
desired, turning several
times and watch the Steak-
Champ: A slow flashing
(every 1.5 seconds) indi-
cates that your steak must
be removed from the grill
soon.
When a fast double flash
signal appears, take the
steak off the heat source.
Put it on a warm plate or
wooden board and let it
rest for a while.
The steak is “perfect” when
the double signal stops
flashing.
The SteakChamp has been
automatically switched-off.
Remove the SteakChamp
from the meat using the
puller.
Enjoy!
INSTRUCTIONS FOR USE
www.steakchamp.com
2
3
4
5
6
1
Switch-off:
SteakChamp switches off automatically:
h
after the cooking process
h
after 90 minutes without temperature
increase
