background image

Déclaration de conformité

Voltage 220-240V :

• Directive machines : (98/37 CEE) incluant :
• Directive basse tension (73/23 CEE) selon la

norme 

EN 60204 - 1

(1997)

• 

Directive Compatibilité Electromagnétique
(89/336 CEE) selon la norme 

EN 55014

,

Edition 1993 et 

EN 55014-2

Edition 1997.

KALA S.A.S.
Parc de l’Ecotay
35 410 NOUVOITOU
FRANCE.

Déclare que le produit suivant :
Modèle : 

SIROCCO

est conforme aux exigences

suivantes

Toujours à la recherche du progrès, nous nous réservons le droit de modifier sans préavis les modèles ainsi que les équipements et leurs caractéristiques techniques.

Konformitätsbestätigung

Spannung 220-240V:

• Maschinenrichtlinie: (98/37 CEE) :
• 

Niederspannungs-Richtlinie (73/23 CEE)
gemäss EN 60204 – 1 (1997)

• Richtlinie bezüglich der elektromagnetischen

Verträglichkeit (89/336 CEE) gemäss EN 55014,
Ausgabe 1993 und EN 55014-2 Ausgabe 1997

KALA S.A.S.
Parc de l’Ecotay
35 410 NOUVOITOU
FRANCE.

bestätigt, daß folgendes Produkt:
Modell 

SIROCCO

folgende Forderungen erfüllt

Sempre alla ricerca di innovazioni, ci riserviamo il diritto di modificare senza preavviso i modelli, le apparecchiature e le loro caratteristiche tecniche.

Dichiarazione di conformità

Tensione 220-240V:

• Direttiva macchina: (98/37 CEE) :
• Direttiva bassa tensione (73/23 CEE) confor-
memente alla normativa 

EN 60204 - 1

(1997)

• Direttiva Compatibilità Elettromagnetica (89/336

CEE) conformemente alla normativa 

EN 55014

,

Edizione 1993 e 

EN 55014-2

Edizione 1997

KALA S.A.S.
Parc de l’Ecotay
35 410 NOUVOITOU
FRANCE.

Dichiara che il seguente prodotto:
Modello: 

SIROCCO 

è conforme alle seguenti diret-

tive

Sempre alla ricerca di innovazioni, ci riserviamo il diritto di modificare senza preavviso i modelli, le apparecchiature e le loro caratteristiche tecniche.

Declaración de conformidad

Voltaje 220 - 240V:

• Directiva máquina: (98/37 CEE) :
• Directiva baja tensión (73/23 CEE) según la
norma 

EN 60204 - 1

(1997)

• Directiva Compatibilidad Electromagnética
(89/336 CEE) según las normas 

EN 55014

,

Edición 1993 y 

EN 55014-2

KALA S.A.S.
Parc de l’Ecotay
35 410 NOUVOITOU
FRANCE.

Declara que el producto siguiente:
Máquina modelo 

SIROCCO

está en conformidad

con las exigencias siguientes

Siempre en pos del mayor progreso, nos reservamos el derecho de modificar sin aviso previo las características y los equipos técnicos de los modelos.

Declaration of conformity

Voltage 220-240V:

• Machine Directive : (98/37 EEC) : 
• Low voltage Directive (73/23 EEC) according

to the 

EN 60204 – 1

(1997)

• Electromagnetic compatibility Directive (89/336

EEC) according to the 

EN 55014

, Edition 1993

and 

EN 55014-2

Edition 1997.

KALA S.A.S.
Parc de l’Ecotay
35 410 NOUVOITOU
FRANCE.

Declares that the following product:

SIROCCO

Model conforms to the following require-

ments

Always seeking to make progress, we reserve ourselves the right to change without notice the models as well as the equipment and their technical features. 

Summary of Contents for Sirocco 1080
















































Reviews: