KAKA Industrial W01-5116, Assembly & Operating Instruction, Page: 3 / 9

and grease. Follow instructions for lubricating and changing accessories.
11. CHECK DAMAGE PARTS. Before using any tool, any parts that appear
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and other
conditions that may affect its operation. Any part that is damaged should
be properly repaired or replaced by an authorized service center unless
otherwise indicated elsewhere in the instruction manual.
12. REPLACEMENT PARTS AND ACCESSORIES. When serving, use only
identical replacement parts. Only use accessories intended for use with
this tool.
13. DON’T OPERAYE TOOL IF UNDER THE INFLUENCE OF ALCOHOL
OR DRUGS. Read warning labels on prescription to determine if your
judgment or reflexes are impaired while taking drugs. If there is any doubt,
don’t operate machine.
14. NEVER STAND ON TOOL. If tool is tipped over, serious injury or product
damage could result.
Unpacking
The 50 inch slip roll machine should come assembled when unpacked. Look
for and loose parts in the packing material before discarding. If any are
found ,try and find the part on the parts list or on the exploded view of the
machine, and reinstall the part.
Assembly and Adjustment
1. Mount the Slip Roll machine to a bench by bolting the base of the machine
(#21) to the bench. Refer to illustration on page 7.
2. Adjust distance between Shaft 1 (#8) and Shaft 2 (#20) if necessary.
a. The distance between Shaft 2 (#20) and Shaft 1 (#8) can be adjusted
by turning the Adjusting Bolts (#35)
b. To decrease the distance between the two shafts, turn the Adjusting
Bolt (#35) clockwise.
C .To increase the distance, turn the adjusting bolt (#35) counter
clockwise.