KAKA Industrial W01-2422, Operation Manual, Page: 3 / 8

oil and grease. Follow instructions for lubricating and changing
accessories.
11. CHECK DAMAGE PARTS. Before using any tool, any parts that appear
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and
other conditions that may affect its operation. Any part that is damaged
should be properly repaired or replaced by an authorized service center
unless otherwise indicated elsewhere in the instruction manual.
12. REPLACEMENT PARTS AND ACCESSORIES. When serving, use only
identical replacement parts. Only use accessories intended for use with
this tool.
13. DON’T OPERAYE TOOL IF UNDER THE INFLUENCE OF ALCOHOL
OR DRUGS. Read warning labels on prescription to determine if your
judgment or reflexes are impaired while taking drugs. If there is any
doubt, don’t operate machine.
14. NEVER STAND ON TOOL. If tool is tipped over, serious injury or product
damage could result.
Unpacking
The Slip Roll machine should come assembled when unpacked. Look for
any loose parts in the packing material before discarding. If any are found,
try and find the part on the machine is missing or broken, please call the
Distributor as soon as possible.
Assembly and Adjustment
1. Mount the Slip Roll machine to a bench by bolting the base of the
machine (#21) to the bench. Refer to the Parts Diagram.
2. Adjust distance between Shaft 1 (#8) and Shaft 2 (#20) if necessary.
a. The distance between Shaft 2 (#20) and Shaft 1 (#8) can be adjusted
by turning the Adjusting Bolts (#35)
b. To decrease the distance between the two shafts, turn the Adjusting