Operation Manual
SJ320
Model SJ320
- 2 -
wet locations. Don
’
t expose to rain. Keep
work area well lighted. Do not use
electrically powered tools in the presence
of flammable gases or liquids.
3.Keep children away. Children must
never be allowed in the work area. Do not
let them handle machines, tools, or
extension cords.
4.Store idle equipment. When not in use,
tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep
them out of reach of children.
5.Do not force tool. It will do the job better
and more safety at the rate for which it
was intended. Do not use inappropriate
attachments in an attempt to exceed the
tool capacity.
6.Use the right tool for the job. Do not
attempt to force a small tool or attachment
to do the work of a large industrial tool. Do
not use a tool for a purpose for which it
was not intended.
7.Dress properly. Do not wear loose
clothing of jewelry as they can be caught
in moving parts. Protective, electrically
non-conductive
clothes
and
non-skid
footwear are recommended when working.
Wear restrictive hair covering to contain
long hair.
8.Use eye and ear protection. Always
wear ISO approved impact safety goggles.
Wear
a
full-face
shield
if
you
are
producing metal filings or wood chips.
Wear an ISO approved dust mask or
respirator when working around metal,
and chemical dusts and mists.
9.Do not overreach. Keep proper footing
and balance at all times. Do not reach
over or across running machine.
10.Maintain tools with care. Keep tools
sharp and clean for better and safer
performance.
Follow
instructions
for
lubricating and changing accessories.
The handles must be kept clean, dry, and
free from oil and grease at all times.
11.Stay alert. Watch what you are doing;
use common sense. Do not operate any
tool when you are tried.
12.Check for damaged parts. Before
using any tool, any part that appears
damaged should be carefully checked to
determine that it will operate properly and
perform its intended function. Check for
alignment and binding of moving parts;
any broken parts or mounting fixtures;
and any other condition that may affect
proper
operation.
Any
part
that
is
damaged should be properly repaired or
replaced by a qualified technician.
13.Guard against electric shock. Prevent
