Operation Manual
AP-2
Model AP-2
- 4 -
determine that it will operate properly and
perform its intended function. Check for
alignment of moving parts, binging of
moving
parts,
breakage
of
parts,
mounting, and other conditions that may
affect its operation. Any part that is
damaged should be properly repaired by
an
authorized
service
center
unless
otherwise indicated elsewhere in the
instruction manual.
15.
REPLACEMENT
PARTS
AND
ACCESSORIES. When servicing, use
only identical replacement parts. Only
use accessories intended for use with this
tool. Approved accessories are available
from the franchiser.
16. DO NOT OPERATE TOOL IF UNDER
THE INFLUENCE OF ALCOHOL OR
DRUGS.
Read
warning
labels
on
prescription to determine if your judgment
or reflexes are impaired while taking
drugs. If there is any doubt, do not
operate machine.
17. NEVER STAND ON TOOL. Serious
injury could occur if the tool is tipper over.
18. KEEP GUARDS IN PLACE AND IN
WORKING
ORDER.
Never
operate
machine unless all guards are function
properly.
19. NEVER USE A TOOL IF ITS COVER
OR ANY BOLTS ARE MISSING. If the
cover or bolts have been removed,
replace them prior to use. Maintain all
parts in good working order.
20. DO NOT ATTEMPT TO LIFT OVERLY
HEAVY WORK. Get help when lifting
tools and materials that are too heavy for
you to do yourself. When appropriate and
whenever possible, use a hoist forklift.
21. CLEAN UP SPILLS LIKELY TO
CAUSE SLIPPING. Keep floor clean and
free of all fluids and other spills likely to
cause slipping. Check material safety
data
sheets
for
proper
clean-up
procedures.
1.Usage
The machine of AP series is suitable for
press-fitting
and
pulling
bearings.
Designed with high quality steel body, it is
easy to be operated, and take advantage
of no power consumption; it is an ideal
tool for energy-saving.
2.Installation and caution
2.1 Installation
2.1.1 Please check whether the part of
this machine are fully equipped and not