1. First put out the telescopic antenna to max length.
2. Select the power mode you want.
3. Select your desired band by sliding the [Band Slider Selector] to Any one of
FM, AM,SW, WB position.
4. Adjust the sound volume by rorating the [Volume Knob] to your desired level.
5. Retate the [Tuning Knob] to select your desired radio stations.
6. Set the [Power Switch] to postion will turn off the radio.
1. Set the [Multi-function Switch] to position, the middle red flash light will
blink.
2. Set the [Multi-function Switch] to position, the SOS alert light will be off.
1. Set the [Multi-function Switch] to position, the radio will be immediately
alarm sound at the maximum volume for some emergencies.
2. Set the [Multi-function Switch] to position, the Siren alarm sound will be
off.
®
Voyager V2
User’s Manual
®
Voyager V2
User’s Manual
Using the Siren Function
Listening to the Radio
Using the SOS Red Flash Alert
7
8
CAUTION!
NOTE:
1. While listening to the FM, SW and WB band programs, please Pull out the
telescopic antenna and adjust its length and angle for optimum reception.
2. While listening to the AM programs,
sensitive ferrite antenna inside the
set will provide excellent AM reception in most areas. For optimum
reception turn the set, as the antenna is directional.
CAUTION!
NOTE: You can use the flashlight, SOS alert light and siren function in the
any power mode.
Right Side View
2
1
3
1
Frequency Tuning Knob
2
Volume Knob
3
Band Slider Selector
