22
Set Beep Time
SET ALARM BY BEEP
When alarm indicator constantly displays, alarm function runs.
The unit will beep when the preset time reaches.
6
1. With the unit turned off, press ENTER button thrice, the
last setting time appears in the display. ( If the beep time
has not been set before, --:-- appears
, will flash for 6
seconds.
2. Press number button to enter the desired beep time
while is flashing.
3. After setting, constantly appears in the display, the
unit returns to clock mode.
4. When the setting time reaches, the beeper will keep on
beep for 60 seconds unless you press any button to stop
it.
DE1102
1
2
3
DEL
CHARGE
SCAN
AM:W/N
POWER
VOL
S
.
STRENGTH
FM ST
FM:ST/MONO
PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER
190
Ö Ç
Ä Ü
³ ä
µ ç
³ ¬Ö ص ÍÒ ô
/
Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾
2
ENTER
EXIT
M/LOCK
FM/BASS
MW
SW/METER
SSB/190MEMORY/ATS
1.
20
2.
3.
23
You have to go to the next step in 6 seconds, or the unit
will exit from the beep setting and return to clock mode.
The beep volume is not controlled by digit volume button.
If the preset time is not changed or cancelled, the beeper
beeps at the preset time everyday.
If power is too weak, beep function does not work.
The beep sound will cover the broadcast if the unit is on
at beep time.
If beep and auto turn on time is set as the same, the unit
will turn on after beep.
If the power source is disconnected, the preset beep time
will be cancelled.
If the earphone is connect with the unit, the beep function
does not work.
Cancel Beep Setting
In power off mode, press ENTER button thrice, flashes,
press EXIT button while is flashing, beep setting is
cancelled with disappears, the unit returns to clock mode.
Check Beep Time
When the unit is off, hold down EXIT button about 0.5s,
flashes and the last preset beeptime displays, 3 seconds
later, the unit returns to clock mode.
7
7
6
