4
Energy saving tips:
a)
Reduce the opening time of the lid.
b)
Turn the grill off as soon as cooking is completed.
c)
Preheat the gas grill for 10 to 15 minutes only.
(Except for the first use)
d)
Do not preheat longer then recommended.
e)
Do not use a higher setting than required.
f)
Connect the hose and regulator to the gas container at the left side of the gas
grill .Keeping in mind that the gas container must be kept away from heat and in a safe
position .The hose dimension is 8-10mm diameter. The Length of hose recommended
which shall not exceed 1.5m.
4. Installation
After purchasing your gas cylinder you will then be ready to set it up with your gas grill.
a)
When changing the gas cylinder which shall be carried out away from any source of
ignition.
Position the gas cylinder at left side or inside of your BBQ, keeping in mind
that the bottle must be kept away from heat and in a safe position.
b)
When ready to use your gas grill insert the regulator into the gas bottle valve and
tighten firmly.
Warning: Before attempting to light your gas grill you must refer to your lighting
instructions and warning / safety points.
Check the hose before each use, searching for cracking, cuts or any abrasions. If the hose
is found to be faulty in any way do not attempt to use your gas grill.
When changing your gas bottle ensures that there are no sources of ignition close by i.e.
fires, cigarettes, naked flames etc. Make sure that the appliance is switched off.
Ensure that the hose is not subjected to twisting which will affect the gas flow when
installing your gas grill. Also the hose must not have undue tension and must not touch
any part of the gas grill which may be hot.
Please choose flexible hose whose heatproof higher than 80
℃
Flexible tube should be changed every 2 years;
It
’
s necessary to change the flexible tube
when the national conditions require it.