CHARGING YOUR SCOOTER
INSPECTION AND MAINTENANCE
09 - ENG
10 - ENG
•
Use only the E-Scooter charger that you
received in your box.
• If the E-Scooter is powered on when
you enter the plug, the Battery Indicator
will begin blinking, if the E-Scooter is
powered off when you enter the plug,
the Battery Indicator will not blink.
Only the indicator light on the charger will
tell you the status of the battery during
charging.
Your E-Scooter requires routine inspection
and maintenance. This chapter describes
maintenance steps and important
operating tips. Before you perform the
following operations, ensure the power and
charging cable is disconnected.
Inspecting and Cleaning your E-Scooter
Disconnect the charger and turn off your
E-Scooter.
Routinely check the body of the E-Scooter
and tires for damage or excessive wear.
Avoid using water or other liquids and
cleaners on the E-Scooter for cleaning. Wet
a clean cloth with clean soapy water, rinse
the cloth thoroughly, and wipe the body of
the E-Scooter making sure that water does
not get into the power button, charging
port, the foot mats, or tires.
Storing your E-Scooter
Fully charge your battery before storing.
If you are storing your E-Scooter for an
extended period of time, please fully
charge your E-Scooter at least once every
three months.
If the ambient temperature of the storage
location is below 0°, please do not charge.
You must bring the E-Scooter into a
warmer environment before charging.
Check under Battery Information and
Specifications for more details.
To prevent dust from getting into your
E-Scooter, try wrapping it or sealing it with
its original packaging.
Store your E-Scooter indoors, in a dry and
suitable temperature.
Users who disassemble the E-Scooter will
forfeit their right of warranty.
