Maintenance instructions
according to EN 1176-1
2019 Kaiser & Kühne Freizeitgeräte GmbH
2019-09-10
Im Südloh 5 – D27324 Eystrup – Telefon 0 42 54/93 15-0 – Fax 0 42 54/93 15 24 – E-Mail [email protected]
-M A I N T E N A N C E I N S T R U C T I O N S- Single point swing Item 040710004
Page 5 of 10
Replace lubrication
required equipment:
•
Lever grease press for taper lubricating nipple (K&K item 5200732)
•
Fluid grease for K&K swing joints (K&K item 5200733)
•
Ladder
•
Cleaning rags/paper towels
•
Allen key (wrench size 5 mm)
The lubricant must comply with Kaiser & Kühne specifications.
Annexion A2
Replace lubrication at least every 6 months
Procedure:
Lube point 1:
1. Remove the screw plug 1 with an
Allen key size 5 mm (do not lose the
sealing ring).
2. Press lubricant into the grease nipple
using a lever grease press until fresh
lubricant emerges from bore 1.
3. Pick up escaping old lubricant with
e.g. cleaning rags and dispose of it
properly.
4. Insert screw plug 1 and tighten firm-
ly.
Lube point 2:
5. Remove the screw plug 2.
6. Press lubricant into the grease nipple
using a lever grease press until fresh
lubricant emerges from bore 2.
7. Pick up escaping old lubricant with
e.g. cleaning rags and dispose of it
properly.
8. Insert screw plug 2 and tighten firm-
ly.
Grease nipple
Connection for
grease press
Lube point 1
Discharge opening
Screw plug 1
Bore 1
Lube point 2
Discharge opening
Screw plug 2
Bore 2
