Kaiser & Kühne 040720001 Instruction Download

Page: 13 / 16

Page 13 of 16

2019

/09

/11

Appendix A2

Replace lubrication at least every 6 months

required equipment:

• Lever grease press for taper lubricating nipple (K&K item 5200732)
•

Fluid grease for K&K swing joints (K&K item 5200733)

•  Ladder
•  Cleaning rags/paper towels
•  Allen key (wrench size 5 mm)

The lubricant must comply with Kaiser & Kühne specifications.

K&K Single point swing # 040720001 - Instruction

Procedure:

Lube point 1:

1. Remove the screw plug 1 with an

Allen key size 5 mm (do not lose
the sealing ring).

2. Press lubricant into the grease

nipple using a lever grease press
until fresh lubricant emerges
from bore 1.

3. Pick up escaping old lubricant

with e.g. cleaning rags and dis-
pose of it properly.

4. Insert screw plug 1 and tighten

firmly.

Lube point 2:

5. Remove the screw plug 2.
6. Press lubricant into the grease

nipple using a lever grease press
until fresh lubricant emerges
from bore 2.

7. Pick up escaping old lubricant

with e.g. cleaning rags and dis-
pose of it properly.

8. Insert screw plug 2 and tighten

firmly.

Lube point 1
Discharge opening

Screw plug 1
Bore 1

Grease nipple
Connection for grease
press

Lube point 2
Discharge opening

Screw plug 2
Bore 2

Kaiser & Kühne Freizeitgeräte GmbH
Im Südloh 5 - 27324 Eystrup

+49 4254 93150

[email protected]

Summary of Contents for 040720001

















Search results

Summary of Contents for 040720001

Reviews:

Related manuals for 040720001

Brands by name

Popular brands

Kaiser & Kühne 040720001, Instruction

Search results

Summary of Contents for 040720001

Reviews:

Related manuals for 040720001

Brands by name

Popular brands