Kairak KRP, Instruction Manual

Page: 8 / 24

PaGE 7
KrP PrEP taBlEs
6. PrEstart cHEcKs
FIG. 5
6a - DEFrost tIME clocK sEttInGs
(For Pan cHIllErs
):
Never apply power to a Kairak unit without setting the time clock to the correct time of
day. (Note: All time clocks are preset at the factory to turn the Pan Chiller “off at 12:00
midnight and back on at 5:00 a.m.” unless otherwise instructed by customer).
To set the time of day, rotate the disc clockwise until the arrow lines up the correct time.
Please note that the clock face is divided into 24 hours. (See Fig. 5).
On self-contained units, the time clock is located inside the compressor compartment.
Remove louvered panel by lifting up and pulling out entire panel. Replace louvered panel
by installing top of panel into track and pushing in the bottom so that the locking clips
fit inside the opening.
On self-contained units with rear-mounted compressors, the time clock is located on the
side. (See Fig. 7).
On remote units and earlier self-contained models, the time clock is located inside the
lower storage cabinet (See Fig. 9).
on cYclE
PIns In
tIMEr sHoWn WItH
clocK sEt at 8 a.M.
oFF cYclE
PIns out