Kaindl SZ, Instruction Manual, Page: 30 / 40

30
22.
DRESSING OF THE GRINDING WHEEL
Place the dresser Part No, 1 0908 in the prism, in order the rotating front part can still be
turned.
Fix the clearance angle to No. 2 and set the angle on the support rest to
118°
.
Now fix the clamping screw in hole
A
(see picture ahead).
Now carefully move the prism feed toward the wheel so the rotating diamond part starts
turning. Now feed
max. 1­2 part lines
. By moving the motor feed, you can now dress the
wheel.
Fix clamping screw in hole A