Kaindl SSG 600-A-DC, Operating Instruction

Page: 13 / 34

19.
ADJUSTMENT AND GRINDING THE OUTSIDE TOOTH
• Open fixation screw of the motor (Picture 2/39).
• Turn the motor to position 0°, the grinding wheel must be on the left side
.
• Open fixation screw (Picture 2/50), move porting arm (Picture 1/19) to the left and
adjust at position: grinding the back of tooth, angle adjustment (Picture 1).
• Adjust the tooth, in the way, that the correct number of teeth are transported.
13
Alternating angle back of tooth Phase angle back of tooth
• Alternating- and phase angle are adjusted with the motor in relation to the motor
scale (Picture 2).
DIRECTION!
•
As the original angles for grinding the back of tooth, the alternating- and phase
angles are often unknown, copy these angles from the tooth of saw blade. We
propose you, to note these angles in a list (see picture Bild 1+2).
• Phase angle 45° below: grind over the back edge of the diamond coating
• Phase angle 45° upside: grind of the front edge of the diamond coating
Tooth distance
Grinding of
back of tooth
+25°
Alternating angle
inside tooth
Angle of inside tooth