12.
INSTRUCTION MANUAL FOR LATER BUIDING THE
GRINDING REST ON THE
SM 180
1 .
Unplug the SM 1 80 and ligthed lens from electric current
(in case this option is mounted on your machine)
2.
Remove the lighted lens (in case this part is mounted)
3.
Lay the machine on its side, so that you can see the lower fastening screws
(M8 flat-head socket cap screw)
4.
Loose all 3 screws and remove the bottom part from the columns
5.
Carefully slide the grinding rest on the correspinding column (left column at the
opening for the grinding wheel).
ADVISE:
in case the grinding rest cannot be
slided from below, then unscrew the complete colukn and try to slide the grinding
rest from the other side onto the column
6.
Fix the bottom part again with the 3 screws and put the machine in upright position.
9
