Technical Parameters
SPECIFICATIONS
TRANSMITTER
RECEIVER
BASIC OPERATION
BASIC OPERATION
High-Low Power
The transceiver has a high-low power selection,
it can be programmed.
Busy Channel Lockout
The function can prevent interference from other transceivers
using the same channel.
Battery Power Saving
If there is no signal or operation,the radio will reduce its power
consumption.The battery power-saving function activates
when the channel is unoccupied or has not been in operation.
Chinese/English Voice Prompt
The transceiver has a manual switching function between the
Chinese and the English.Switch to Channel 16,turn off the
transceiver,then press 【UP】 key and meanwhile turn on the
transceiver to switch between the Chinese and English.
VOX
This function can be voice activated so the user doesn't
have to press the PTT key. Switch to Channel 7,turn off the
transceiver,then press the 【UP】 key and turn on the
transceiver at the same time to switch between the ON and
OFF of the VOX function. VOX gain inversion level refers to
the voice sensitivity, it has level 1-9!
Low Battery Warning
If the battery power falls to the predetermined value during
transmission,the transceiver will give out a voice prompt,
please charge in time.
Time Out Timer(TOT)
The purpose of the TOT is to prevent any single person from
using a channel for an extended period of time.An alarm will
sound if the transmission continues beyond the set time.The
transceiver will stop transmission if this occurs.To stop the
alarm,release the PTT key and the transceiver will return to
standby.
CTCSS/DCS
The transceiver has 50 CTCSS and 208 DCS,
also non-standard subaudio can be programmed!
Special Signaling
Special Signaling refers to the CDCSS on the channels is
special processed codes.Only when the transceivers in the
same company are programmed the same frequency point
with the same CDCSS and meanwhile special signaling is
programmed,then they can talk to each other.
Frequency Range
Supply Power
Memory Channel
Antenna Configuration
Work Mode
Ground Method
Dimension
Output Power
Modulation Mode
Max.Frequency Deviation
Sparious Radiation
Preemphasis Character
Emission Current
Sensitivity
Audio Power
Audio Distortion
Intermodulation
InterferenceResistance
Receiving Current
Standby Current
DC3.7V
22
Internal Antenna
Co/Differ-frequency
Simplex Communication
Cathode
122*58.5*33.2mm
2W/0.5W
FM(F3E）
≤
2.
5KHz
≤7.5μW
Per Octave 6dB
≤1000mA
＜0.16μV（12dB SINAD）
≥300mW
＜5%
≥60dB
≤300mA
≤20mA
▲We May Change The Specifications For Technical
Improvement Without Prior Notice.
462.5500-462.7250MHz
467.5625-467.7125MHz
