2
the memory before), while backlight flash 3 times, control box
buzzing 1 time;
After remembering the position, press the button 2, the bed body
switch to the viewing position;
Key 3: press button 3 for 3 seconds, remember the current position (cover
before memory), while backlight flash 3 times, control box buzzing
1 time;
After remembering the position, press button 3, the bed body
switch to BOOK position;
Key 4: press button 4,bed back rise;
Key 5:press button 5,bed leg rise;
Key 6:press button 6,bed back down;
Key 7:Press button 7, short press button 7, push rod 1 and push rod 2 retract
at the same time; press any key to stop during the operation of
the push rod;
Key 8：Long press button 8, push rod 2 retracts, release it to stop；
Key 9: Short press button 9 to stop the push rod running to a fixed position
(zero gravity mode); long press button 9 for 3 seconds, the current
position is memorized (overwrite the previous memory), and the
backlight flashes 3 times quickly, the control box bee Beep once;
after the position is memorized, short press button 9 to switch
the fader to the current memorized position;
Key 10: Short press button 10, the vibration mode is selected (there are
4 modes in total), when the vibration motor starts to work, it
will switch from the original default vibration mode
(intermittent vibration with slower frequency) to the first level,
and press it again to gradually increase the cycle. First gear:
slower frequency intermittent vibration; second gear: faster
frequency intermittent vibration; third gear: fastest frequency
intermittent vibration; fourth gear: continuous vibration; four
modes are switched in sequence; within 30 minutes If there is no
operation to change the button, the vibration motor is
automatically turned off.
Key 11: Long press button 11 for about 3 seconds, the backlight flashes
for 3 seconds and then stays on, the control box will memorize
the current push rod position; at the same time, the buzzer buzzes
once and the backlight turns off; short press button 11 again to
push The lever moves to the memory position.
